You will see the shipping cost at checkout.
Decorative wooden trim with a two-tone pattern. The trim's width is approximately 1.1 cm, length 50 cm, and thickness at the highest point approxim...
View full detailsWide molding with engraved decorative pattern. Decorative unpainted wood, geometric pattern, 2.2 x 0.5 x 50 cm
A striking list with a decorative pattern. List length 50 cm x height approx. 1.8-2 cm x profile thickness from the thickest part approx. 1.2 cm. U...
View full detailsThe decorative molding is suitable for many different uses in miniature model building. Length 50 cm x 1 cm x thickness 2-5 mm. The material is un...
View full detailsWooden molding with a carved pattern. The height of the strip is about 1.5 cm x length 50 cm. The material is wood. Note, there are big differenc...
View full detailsA striking decorative molding with a wave-like pattern. Strip width 1.5 cm x length 50 cm. Thickness from one edge about 2 mm and from the other ed...
View full detailsWooden decorative molding for dollhouse crafts. Length 50 cm x height approx. 1.1 cm x profile thickness approx. 0.4 cm. Untreated wood.
Decorative wooden molding for miniature model construction. Length 50 x height approx. 1.5 x porfile thickness approx. 0.7 cm. Untreated wood.
Geometric and relief pattern in wooden molding. The height of the strip is approx. 2 cm x length 50 cm. Embossed wooden molding.
A very graceful and thin list. The finished wooden strip is about 0.3 x 0.2 x 60 cm Note, thin strips may bend slightly when drying in heated sto...
View full detailsA low decorative plate for miniature model building. The list is thin plywood. Thickness about 1.3 cm. Height about 1.25 cm x length 30 cm. The wid...
View full detailsEmbossed decorative molding for building miniature models. The width of the strip is approx. 1.9 cm x length 50 cm. The highest point of the profil...
View full detailsSemi-circular balls on a smooth wooden strip List length 50 cm x height approx. 1 cm x profile height approx. 0.5 cm. Untreated wood.
Decorative moulding with a ball pattern. Length 50 cm x height approx. 1 cm x profile thickness approx. 0.4 cm. Untreated wood.
Narrow decorative molding with square design. The width of the strip is about 1 cm x the length is 50 cm. Untreated wood.
Thin lace-edged decorative molding with round cuts. 1.2 x 0.2 x 45cm Untreated wood
Thin lace-edged decorative moulding with round cuts. This package includes 4 pcs. 1.2 x 0.2 x 45cm Untreated wood
Thin molding with a decorative border. Decorate unpainted wood. the height of the strip approx. 0.8 cm to the beginning of the decorative pattern a...
View full detailsA decorative molding that is suitable, for example, as an eaves molding for a lace villa, for decorating a terrace, balcony or furniture. The heigh...
View full detailsUnpainted trim with a semi-circular profile, approximately 0.7 cm at its highest point. The wood trim's thickness at the edges is about 0.2 cm. Sui...
View full detailsWooden relief molding for building miniature models. The height of the strip is about 2 cm x the length is 50 cm. Embossed wooden molding.
Christmas decoration suitable for the table. Made of resin. Height 4 cm. Made of resin. Made of polyresin. height about 4 cm.
A very graceful decorative ribbon for dollhouse textiles and furniture upholstery. Length 2 m
A 'satin ribbon' with a gold border suitable for Christmas decorations, crafts and crafts. Length approx. 1 meter. Width approx. 4 mm.
Shiny light green decorative ribbon for miniature crafts. Width 2 mm x length 2 m
High quality sparkling blue miniature ribbon. Width approx. 2 mm x length 2 m.
Decorative ribbon for finishing small crafts. The very narrow ribbon is approximately 3mm wide x 1.5 meters long. Sophisticated silver-grey shade.
Decorative ribbon for finishing small crafts. The very narrow ribbon is approximately 3mm wide x 1.5 meters long.
Decorative ribbon for finishing small crafts. The very narrow ribbon is approximately 2 mm wide x 1.5 meters long. A charming old rose shade.
Width approx. 2-5 mm x length 2 m
Decorative knob, wood, 12 pcs Decorative knob, wood, 12 pcs, 1.0 x 0.3 x 0.3 cm
Decorative knob, wood, 12 pcs Decorative knob, wood, 12 pcs, 1.5 x 0.7 x 0.7 cm
The decorative 'plaster panel' is made of resin. The height of the miniature building material is 2.2 x width 7cm.
Decorative plasterboard 5.5 x 4.5 cm
A miniature statue to decorate a dollhouse. Height about 2 cm. The accurate photo shows that the face is not perfectly painted, but the statue is s...
View full detailsA small decorative item for a chest of drawers or on the fireplace. Height about 2 cm. The accurate photo shows that the face is not perfectly pain...
View full detailsA very small decorative item. Height about 2 cm. The accurate photo shows that the face is not perfectly painted, but the statue is so small that y...
View full detailsSmall miniature statues create layers in the interior of the dollhouse. The height of the statue is 3.5 cm. There are 2 in the package, male and...
View full detailsMiniature statue for decoration. The statue's base is approximately 1.8 x 0.5 cm. height 3 cm. The heavy metal statue stays upright well.
Very small decorative hinges in antique patinated metal. Height 1.4 cm, width approx. 8 mm. Patinated metal. Height 1.4 cm, width approx. 8 mm. He...
View full detailsA tiny hinge for dollhouse furniture and other miniature model construction. The height of the hinge point is approx. 6 mm, the width of the whole...
View full detailsSmall antique patinated hinges for miniature models. height 9 mm, hinge pin height 15 mm, width when spread open 10.5 mm 1.0 x 1.4 cm 1.0 x 1.4 cm
Decorative old-fashioned hinge of patinated metal, with nails. height 13 mm/ 7 mm, width when spread open 18 mm. Small nails included in the packag...
View full detailsAn old-fashioned hinge with decorative details. The total length of the hinge when 'opened' is about 3.5 cm. The longer part is 3 cm and the shorte...
View full detailsVery strong blue vase with embossed white decorations. The diameter of the miniature is 1.5 cm from the base and 2 cm from the top. Height 3 cm. T...
View full detailsAn armchair made of wire with a high backrest. A classic piece of furniture suitable for a dollhouse veranda, terrace and garden. The base of the ...
View full detailsThe high-quality chair is suitable for the veranda and garden patio. The fair-sized and attractive chair has a scale of 1:12. Width 6.2 x depth...
View full detailsA truly magnificent miniature piece of furniture of very high quality. The handsome cabinet is beautifully finished and all drawers, shelves and ca...
View full details€100,00 away from free shipping!
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
[message]
[title]
[message][subMessage]
Love it? Add to your wishlist
Your favorites, all in one place. Shop quickly and easily with the wishlist feature!