Moldings, craft sticks, cardboard

White painted floor molding. Height 1.2 x length 45 x thickness approx. 0.25 cm.

The slat cutter is suitable for cutting wood and plastic straight or at the desired angle. The new model has a handy support iron to support the li...

A smaller drill bit for miniature model building. 0.3 x 0.6 x 61 cm untreated wood. Untreated wood 0.3 x 0.6 x 61 cm Untreated wood 0.3 x 0.6 ...

Gray 100% recycled cardboard for background cardboard, frames, for building dollhouse furniture or model building Sheet 25x35 cm, thickness 3 mm...

White painted ceiling molding with a curved profile. The ceiling molding is white painted wood. Dimensions about 1 x 1 x 45 cm

A small drill bit with a square profile for miniature model building. 0.4 x 0.4 x 60 cm untreated wood.

A profiled list that fits e.g. to the upper edge of the half-panel before wallpaper or many other similar applications, The width of the strip is ...

Wooden floor skirting. Height approx. 1.2 x width 45 cm x thickness approx. 0.25 cm.

A profiled list that fits e.g. to the upper edge of the half-panel before wallpaper or many other similar applications, The width of the strip is...

A longer and narrower popsicle stick for crafting.

Thin wooden molding with a decorative profile. Maximum height of the pattern approx. 1.5 cm, length 60 cm, thickness approx. 2 mm. Note, thin s...

Graceful list with concave profile. Suitable for frames or as a small ceiling molding. Finished wooden strip approx. 0.5 cm x length 60 cm. Note, ...

The very thin and narrow strip is also suitable for smaller-scale construction work. length 60cm Store the wooden slats tied together, e.g. in a ...

Slightly higher floor molding for the dollhouse. Height 1.2 x thickness approx. 0.2 x length 60 cm Note, thin strips may bend slightly when dryin...

Ceiling molding with a curved profile. 1 x 1 x 45 cm untreated wood.

Drill bit for miniature model building. approx. 1.2 x 0.3 x 61 cm untreated wood

A thick bar with a square profile. Wood strip 0.8 x 0.8 cm x length 60 cm. Untreated wood. Note, thin strips may bend slightly when drying in h...

Gray 100% recycled cardboard for background cardboard, for building dollhouse furniture or model building Sheet 25x35 cm, thickness 1.3-1.5mm, 1...

The narrow frame strip is also suitable as a ceiling strip for smaller-scale houses. Wooden strip with corner profile 0.5 x 0.55 x 45 cm white pa...

Profile molding is suitable for many construction needs, not only for windows and doors, but also as skirting. Height 1 cm x thickness just over 2 ...

Classic glue-lined planking as an unpainted element. The height of the product is about 9 cm, where each board is about 1 cm wide. Element length 4...

Gray 100% recycled cardboard for background cardboard, for building dollhouse furniture or model building Sheet 25x35 cm, thickness 2 mm, 1500 g

A fair-sized wooden strip with a square profile is suitable, for example, as a ceiling beam in an old-time house. Wood strip, 1 x 1 x length 45 cm....

Thicker (5 mm) and wider bar for miniature model building. Wood strip, 2.5 x 0.5 x 61 cm. Untreated wood.

Wide and long, slightly thicker (3 mm) drill bit. Wood strip, 1.9 x 0.3 x 61 cm. Untreated wood.

Unpainted very small wooden finished round moldings. round strip length 20 x diameter 0.2 cm. Mind you, there might be someone a little more crook...

A striking list with a decorative pattern. List length 50 cm x height approx. 1.8-2 cm x profile thickness from the thickest part approx. 1.2 cm. U...

Longer frame strip of untreated wood. Also suitable as a ceiling molding for a smaller scale dollhouse. The thin molding is suitable for dollhouse ...

Profile molding, e.g. as a wall panel or floor molding. Finished wooden strip 9 x 2 mm, length 60 cm. Note, thin strips may bend slightly when dr...

Kulmalista sopii kehyksiin tai nukkekodin kattolistaksi. 0,7x0,7x45cmKäsittelemätöntä puuta. Puun väri ei ole näin keltainen, vaan ihan keskiruskea...

Strip for the bottom edge of the railing. The width of the strip is approximately 1 cm and the height is approximately 0.5 cm. The width of the gro...

A package of two pieces. The rail groove is approx. 3 x 3 mm. Handrail with groove, 0.75 x 0.75 cm x length 32 cm. Untreated wood.

Wooden molding with a carved pattern. The height of the strip is about 1.5 cm x length 50 cm. The material is wood. Note, there are big differenc...

Wider popsicle stick for crafting. A straight stick with both ends rounded like an ice cream stick. Length 20 cm, width 2.5 cm There are 50 pie...

Very small popsicle sticks for crafting. length 5.5 cm, width 0.6 cm approx. 400 pcs length 5.5 cm, width 0.6 cm 400 pcs length 5.5 cm, width 0.6 ...

Graceful decorative molding for decorating furniture or house structures. The low decorative molding is 0.5 x 60 cm Note, thin strips may bend sl...

Corner molding with toothed decorative edge. approx. 1.2 x 60 cm Note, this list may sometimes be missing the 'last tooth', depending on how the ...

The decorative molding is suitable for many different uses in miniature model building. Length 50 cm x 1 cm x thickness 2-5 mm. The material is un...

A decorative molding that is suitable, for example, as an eaves molding for a lace villa, for decorating a terrace, balcony or furniture. The heigh...

Thin molding with a decorative border. Decorate unpainted wood. the height of the strip approx. 0.8 cm to the beginning of the decorative pattern a...

Semi-circular balls on a smooth wooden strip List length 50 cm x height approx. 1 cm x profile height approx. 0.5 cm. Untreated wood.

Wooden decorative molding for dollhouse crafts. Length 50 cm x height approx. 1.1 cm x profile thickness approx. 0.4 cm. Untreated wood.

The very graceful molding is suitable as a small ceiling molding, as a cover for various structures and for picture frames. Finished wooden molding...

A classic floor molding completes the wallpapering and the interior of the room. It is also suitable as a cornice. 1.0 x 0.15 x 45cm Untreated wo...

Traditional popsicle sticks with both rounded ends. 11.5 cm x 1 cm, 200 pcs

The smooth wooden strip is 60 cm long, 2 cm high, 1.5 mm thick smooth wooden strip 2cm high, 1.5mm thick Note, thin strips may bend slightly wh...

The H-profile can be used to finish various miniature model structures. Drilling strip H-profile 1.5 x 2 x 45 cm. Untreated wood. The dimensions...