The slat cutter is suitable for cutting wood and plastic straight or at the desired angle. The new model has a handy support iron to support the li...

White painted floor molding. Height 1.2 x length 45 x thickness approx. 0.25 cm.

Small hinges for building a miniature model. height approx. 7.5-8 mm (H) x hinge spread approx. 10.5 mm. There are 4 pieces in the package.

Small hinges with screws. The size of the small hinge is about 10 x 8mm. Small screws included in the package. 10 x 8mm 10 x 8mm

An outward-opening dollhouse front door with a door handle, letterbox and knocker. The small door is made of painted wood. The gold-colored decora...

A smaller drill bit for miniature model building. 0.3 x 0.6 x 61 cm untreated wood. Untreated wood 0.3 x 0.6 x 61 cm Untreated wood 0.3 x 0.6 ...

Wooden floor skirting. Height approx. 1.2 x width 45 cm x thickness approx. 0.25 cm.

White painted ceiling molding with a curved profile. The ceiling molding is white painted wood. Dimensions about 1 x 1 x 45 cm

A profiled list that fits e.g. to the upper edge of the half-panel before wallpaper or many other similar applications, The width of the strip is ...

Four hinges and the necessary nails in brass color. Small hinges are 16 x 12 mm. The package contains 4 hinges and the necessary nails. The hinges...

the small, light dollhouse wall hooks are suitable for many hanging needs. 9 x 14 mm Light brass painted plastic. These are suitable as a coat...

Ready-made furniture legs, for example for a chair. Length 2.9 cm. untreated wood. There are 4 pieces in the package. Each furniture leg has a d...

A small drill bit with a square profile for miniature model building. 0.4 x 0.4 x 60 cm untreated wood.

Gray 100% recycled cardboard for background cardboard, frames, for building dollhouse furniture or model building Sheet 25x35 cm, thickness 3 mm...

A wooden window without plexiglass. External dimensions: width 80 mm, height 120 mm,, embedded dimensions: width 59 mm, height 100 mm, immersion ...

Shower and shower arm for a modern bathroom. Total height about 11 cm. Width at the widest point about 1.3 cm. The shower has a square 'rain show...

Old-fashioned decorative lock plates with a knob Lock plate length approx. 2.3 cm x width approx. 0.6 cm. Key about 1.3 cm. In this model, the pita...

A separate sink is a convenient choice for a dollhouse builder. The pool can be installed in suitable dollhouse furniture from Minimaailma's selec...

A thick bar with a square profile. Wood strip 0.8 x 0.8 cm x length 60 cm. Untreated wood. Note, thin strips may bend slightly when drying in h...

A profiled list that fits e.g. to the upper edge of the half-panel before wallpaper or many other similar applications, The width of the strip is...

Graceful list with concave profile. Suitable for frames or as a small ceiling molding. Finished wooden strip approx. 0.5 cm x length 60 cm. Note, ...

Traditional popsicle sticks with both rounded ends. 11.5 cm x 1 cm, 200 pcs

A separate sink is a convenient choice for a dollhouse builder. The diameter of the sink at its top edge is approx. 4 cm. The diameter of the bo...

Thicker (5 mm) and wider bar for miniature model building. Wood strip, 2.5 x 0.5 x 61 cm. Untreated wood.

Gray 100% recycled cardboard for background cardboard, for building dollhouse furniture or model building Sheet 25x35 cm, thickness 1.3-1.5mm, 1...

The very small dollhouse door handles are antique patinated metal. The height of the lock plate is approx. 1.7 x width only 3.6 mm. The length of...

The smaller door has a brass-colored lock plate on one side of the door. Door width approx. 7.2 cm x height 15 cm. This dollhouse door has no ins...

Longer frame strip of untreated wood. Also suitable as a ceiling molding for a smaller scale dollhouse. The thin molding is suitable for dollhouse ...

The very thin and narrow strip is also suitable for smaller-scale construction work. length 60cm Store the wooden slats tied together, e.g. in a ...

Slightly higher floor molding for the dollhouse. Height 1.2 x thickness approx. 0.2 x length 60 cm Note, thin strips may bend slightly when dryin...

Profile molding, e.g. as a wall panel or floor molding. Finished wooden strip 9 x 2 mm, length 60 cm. Note, thin strips may bend slightly when dr...

The corner molding is suitable for frames or as a ceiling molding for a dollhouse. Please note, this package contains 4 pieces. 0.7x0.7x45cm Untre...

Traditional bathroom faucet with separate handles for hot and cold water. The faucet washer is approximately 2.5 x 0.8 cm. The overall height is a...

A fair-sized wooden strip with a square profile is suitable, for example, as a ceiling beam in an old-time house. Wood strip, 1 x 1 x length 45 cm....

A product suitable for closing a door or gate. The hook is about 2 cm long and 0.8 cm high at its highest point. The outer diameter of the eye scr...

Drill bit for miniature model building. approx. 1.2 x 0.3 x 61 cm untreated wood

A striking list with a decorative pattern. List length 50 cm x height approx. 1.8-2 cm x profile thickness from the thickest part approx. 1.2 cm. U...

Thin wooden molding with a decorative profile. Maximum height of the pattern approx. 1.5 cm, length 60 cm, thickness approx. 2 mm. Note, thin s...

A simple white 6-pane window without plexiglass. External dimensions: width 80 mm, height 120 mm,, Recessed dimensions: width 59 mm, height 100 mm...

Profile molding is suitable for many construction needs, not only for windows and doors, but also as skirting. Height 1 cm x thickness just over 2 ...

These rather small hinges can be put on the front doors of several dollhouses. Two screws of different lengths included. Height 2.5 cm x width 2 cm...

Small coat hooks for hallways, kitchens and many other needs. 0.7 x 1.4cm. Antique patinated metal. There are four hooks in the package

The narrow frame strip is also suitable as a ceiling strip for smaller-scale houses. Wooden strip with corner profile 0.5 x 0.55 x 45 cm white pa...

Ceiling molding with a curved profile. 1 x 1 x 45 cm untreated wood.

A classic wooden door with six panels. The size of the door including the frames is about 8.9 x 18.5 cm. Installation hole size 17.7 x 7.4 cm ...

Luxurious wood carvings decorate this festive double door. Dollhouse door width 13.6 x 19.5 cm. Sink opening approx. 12.4 x 18.9 cm. Immersion dep...

Metal knobs for drawers, cabinets and other furniture. The knob diameter is about 0.4 cm and the height is about 0.5 cm. The gold-colored knobs are...

A longer and narrower popsicle stick for crafting.