A simple white 6-pane window without plexiglass. External dimensions: width 80 mm, height 120 mm,, Recessed dimensions: width 59 mm, height 100 mm...

A longer and narrower popsicle stick for crafting.

A slightly lower door with a small window. external dimensions 9 x 16 cm immersion hole 7.5 x 15.5 immersion depth 6 mm Plexiglas for the window ...

Profile molding, e.g. as a wall panel or floor molding. Finished wooden strip 9 x 2 mm, length 60 cm. Note, thin strips may bend slightly when dr...

Old-fashioned decorative lock plates with a knob Lock plate length approx. 2.3 cm x width approx. 0.6 cm. Key about 1.3 cm. In this model, the pita...

The stairs of a dollhouse or miniature world are made of untreated wood. The width of the stairs is about 5.6 cm and the total length of the produ...

Wide and long, slightly thicker (3 mm) drill bit. Wood strip, 1.9 x 0.3 x 61 cm. Untreated wood.

A product suitable for closing a door or gate. The hook is about 2 cm long and 0.8 cm high at its highest point. The outer diameter of the eye scr...

Miniature keys for all rooms of the dollhouse. Two longer keys approx. 1.6 cm and two shorter keys approx. 1.2 cm. The keys can be removed from ...

Wooden stairs with railing. The stairs are suitable for a 1:12 scale dollhouse. 13 steps, railing on the left The product is suitable for a room he...

List at the bottom of the railing. The width of the strip is about 9.6 mm and the height about 6.2 mm. The width of the groove is about 3 mm. Li...

Unpainted very small wooden finished round moldings. round strip length 20 x diameter 0.2 cm. Mind you, there might be someone a little more crook...

Ready-painted railing for dollhouse balcony, yard and other miniature model works. White painted wood. Height 6.5 cm x length 15 cm.

Small coat hooks for hallways, kitchens and many other needs. 0.7 x 1.4cm. Antique patinated metal. There are four hooks in the package

Classic casement window in white painted wood. Plexiglas included. The outside dimensions of the window are approx. 7 x 7 cm. Immersion opening ap...

Mini screws for miniature model building. Cross-head brass screw. Length about 6 mm. There are about 25 pieces in the package.

Small screws for building miniature models. Length approx. 4 mm x width approx. 2 mm. about 20 pcs in the package.

A thick bar with a square profile. Wood strip 0.8 x 0.8 cm x length 60 cm. Untreated wood. Note, thin strips may bend slightly when drying in h...

Dark, silvery door handle. Length approximately 2 cm. Material is thin metal.

Decorative old-fashioned hinge of patinated metal, with nails. height 13 mm/ 7 mm, width when spread open 18 mm. Small nails included in the packag...

A striking list with a decorative pattern. List length 50 cm x height approx. 1.8-2 cm x profile thickness from the thickest part approx. 1.2 cm. U...

The large window can be installed either horizontally or vertically. 12-pane wooden finished window. External dimensions approximately 13.5 x 10.7 ...

Sink faucet and outlet pipe in matte silver gray. Faucet width approx. 1.2 cm x height 0.8 cm. Exhaust pipe width approx. 1.5 x height 1.4 cm. ...

Wider popsicle stick for crafting. A straight stick with both ends rounded like an ice cream stick. Length 20 cm, width 2.5 cm There are 50 pie...

Longer frame strip of untreated wood. Also suitable as a ceiling molding for a smaller scale dollhouse. The thin molding is suitable for dollhouse ...

A tiny wall-mounted faucet. total length approx. 1.25 cm and height at the handle approx. 0.9 cm. Wall mounted model. There is 1 pc in the package.

These rather small hinges can be put on the front doors of several dollhouses. Two screws of different lengths included. Height 2.5 cm x width 2 cm...

Kulmalista sopii kehyksiin tai nukkekodin kattolistaksi. 0,7x0,7x45cmKäsittelemätöntä puuta. Puun väri ei ole näin keltainen, vaan ihan keskiruskea...

Low single-lever faucet for the bathroom sink. In the first pictures, the taps have been put in a blue sticker upright for photography. The pin to...

Crescent-shaped handles for drawers and cabinets. Width about 0.9 x height 0.5 cm. Material metal.

Crescent-shaped handles for drawers and cabinets. Width about 0.9 x height 0.5 cm. Material metal.

Smaller miniature fence with mounting plate included. Length 8.5 cm x base depth 1.9 x height 4.6-5 cm Untreated wood. The product comes in two...

Black 'wrought iron' hinges with brass nails. The length from the hinge to the end of the decorative iron is approx. 3.5 cm. length approx. 3.5 cm...

Thicker (5 mm) and wider bar for miniature model building. Wood strip, 2.5 x 0.5 x 61 cm. Untreated wood.

Luxurious wood carvings decorate this festive double door. Dollhouse door width 13.6 x 19.5 cm. Sink opening approx. 12.4 x 18.9 cm. Immersion dep...

A package of two pieces. The rail groove is approx. 3 x 3 mm. Handrail with groove, 0.75 x 0.75 cm x length 32 cm. Untreated wood.

The turned spindle is suitable, for example, as a table leg or as a building material for a railing. Pole height 6.7 cm, thickness 0.5/0.2 cm Ther...

Old-fashioned coat hooks. 0.7 x 1.4cm, patinated metal. The package includes 2 hooks.

A traditional 4-pane window with plexiglass and internal frames. The outside dimensions of the window are 7 x 7 cm. Immersion opening approx. 6.2 ...

A striking door handle for a doll's house door or cabinet, antique-looking patinated brass. Length about 2.6-2.7 cm

Two longer keys approx. 1.6 cm and two shorter keys approx. 1.2 cm. If necessary, the keys can be removed from the ring.

Very small eye screw in antique patinated color. Eye screw, 4x8mm, antique brass, 5 pcs

A very small screw for building miniature models. Length approx. 8 mm x base approx. 2 mm. About 20 pcs in the package.

A very small window painted white. 5 x 5 cm Immersion opening 4.3 x 4.3 cm White painted wood. Plexiglas in the window. 5 x 5 cm 5 x 5 cm

Wooden stairs are suitable for a room with a height of 21-22 cm. Stairs width 6.5 cm, length 24 cm. Suitable for a room about 21-22 cm high as it i...

A striking double door made of pre-painted white wood. Double door size: 19.5 x 13.5 cm Door recess: approx. 18.9 x 12.4 cm The package inclu...

Vertical paneled cabin door with curved top edge and window. Door width approx. 10 cm x height 19 cm. Recessed opening approx. 9.6 x 18.7 cm with ...

Classic chrome door handles. The length of the dollhouse door handle is approx. 1.25 cm. Total height approx. 9.5 mm, of which the portion of the p...