Small wooden knobs for cabinet and drawer pulls. Knob diameter approx. 0.5 cm x total length approx. 0.9 cm. There are 10 pieces in the package. ...

Classic interior door for a dollhouse. The height of the wooden door is approximately 17.3 x width 7.3 cm. The edges and corners of this door pan...

Antique patinated hinges for miniature models. The total length of the hinge when 'opened' is about 3.5 cm. The longer part is 3 cm and the shorter...

A decorative molding that is suitable, for example, as an eaves molding for a lace villa, for decorating a terrace, balcony or furniture. The heigh...

Thin molding with a decorative border. Decorate unpainted wood. the height of the strip approx. 0.8 cm to the beginning of the decorative pattern a...

Semi-circular balls on a smooth wooden strip List length 50 cm x height approx. 1 cm x profile height approx. 0.5 cm. Untreated wood.

Wooden molding with a carved pattern. The height of the strip is about 1.5 cm x length 50 cm. The material is wood. Note, there are big differenc...

The very graceful molding is suitable as a small ceiling molding, as a cover for various structures and for picture frames. Finished wooden molding...

Tall faucet for the kitchen sink. A very graceful faucet in cabinet size. Width about 1.2 1.3 cm x height 2-2.2 cm. Width about 1.2 cm x height ...

A classic floor molding completes the wallpapering and the interior of the room. It is also suitable as a cornice. 1.0 x 0.15 x 45cm Untreated wo...

Slender metal brackets for wall shelves. Product height approx. 1.8 cm x depth approx. 1.6 cm. the brackets are suitable for a shelf about 1 cm dee...

Narrow stairs, the railing of which can be installed on either side. Length 27 cm, enough for 20 + 1 cm room height, width 5 cm + handrail 0.7 cm, ...

Very small popsicle sticks for crafting. length 5.5 cm, width 0.6 cm approx. 400 pcs length 5.5 cm, width 0.6 cm 400 pcs length 5.5 cm, width 0.6 ...

Very small hinges. rectangular part approx. 8.5 x 5 mm and triangular part approx. 1 cm x 5 mm. Width when unfolded 14 x height 8.5 mm 14 x 8....

The smooth wooden strip is 60 cm long, 2 cm high, 1.5 mm thick smooth wooden strip 2cm high, 1.5mm thick Note, thin strips may bend slightly wh...

The magnetic lock is suitable, for example, for holding the front doors of a dollhouse. length 4.3 mm thickness of one piece 1.3 mm flat iron l...

Smooth surface lock plate without decorations. Lock plate 0.6 x 1.9 cm. Thin metal. The package contains 2 lock plates and 2 keys. 0.6 x 1.9cm 0...

A small keychain made of dark metal. The length of the keys is approx. 1-1.5cm 1-1.5 cm 1-1.5 cm

Graceful decorative molding for decorating furniture or house structures. The low decorative molding is 0.5 x 60 cm Note, thin strips may bend sl...

Corner molding with toothed decorative edge. approx. 1.2 x 60 cm Note, this list may sometimes be missing the 'last tooth', depending on how the ...

The decorative molding is suitable for many different uses in miniature model building. Length 50 cm x 1 cm x thickness 2-5 mm. The material is un...

Contemporary tall kitchen faucet. The tap is installed on the blue sticker in the first pictures. The length of the pin that comes to the table is ...

Drainage pipe under the sink. The size is about 1.4 x 1.4 cm.

Small nails that are suitable for use with, for example, a nail press. Used with pusher PPU8174

A classic wooden door with six panels. The size of the door including the frames is about 8.9 x 18.5 cm. Installation hole size 17.7 x 7.4 cm ...

A shiny black door knocker for the dollhouse door. The width of the knocker is approx. 1.1 x height 1.6 cm. The knocking part is 'working', i.e. mo...

Very small loose numbers for the house wall or other miniature model building. Height of numbers approx. 0.5 cm x width approx. 0.4 cm. "bold" typ...

A wooden door that opens outwards is suitable as a themed door for different seasons. The unpainted miniature model of the door opens outwards and...

A black 'J-shaped' curved bar part that is attached to the wall and a small brass clock in the shape of a carriage. The bell has a small flat par...

A wide ceramic sink is suitable for a dollhouse kitchen or laundry room. Width 12 x depth 4.5 x height up to level 6 cm. Total height 6.9 cm. ...

Decorative shelf supports in antique patinated brass and a thin shelf plate in untreated wood. Graceful wall shelf for a dollhouse. Wooden shelf b...

Door handle handle 1.3cm, tile Ø 0.5cm.   There are 2 iminiature door handles n the package. They are patinated metal.

A very small nail for model building. Length about 6 mm.

High-quality pulls made of heavy brass. Thanks to the threaded pin, this product allows the knobs to be in the same place on both sides of the inte...

Ready-painted balustrade for stairs, balconies and fences. The photo shows the wood-finished version, but the product is therefore white. Length 4...

A shorter handrail made of untreated wood. 0.7 x 27 cm

Ready-painted handrail set at the top of the stairs, around the opening. 3-part railing set for dollhouses and miniature models. The widest part...

The package includes a double faucet, a single faucet, a tub plug and a chain + 3 door handles, all brass Note the double tap is at a slanted ang...

A metal ring for e.g. a curtain rod. Diameter about 5 mm. There are about 50 pieces in the bag.

Dollhouse door with pane window and plexiglass. Width 9 x height 18.5 cm Sink opening approx. 8.3 x 18 cm. Immersion depth approx. 0.9 cm. Ple...

Enamel-like embossed sign with textile ribbon. The largest width of the heart-shaped sign is about 3 cm x height from the middle about 2 cm. Texti...

Classic crescent shaped handle with 'rivets'. Width about 1 cm x depth about 0.6 cm from the widest part of the crescent.

A very small screw for building miniature models. Length 4 mm. There are 12 pieces in the package. Note, the base of the screw is also very small. ...

Round column for miniature model building. Dollhouse wooden post with a round profile. Column height approx. 21.5 cm (+/- 3 mm). The base approx. 2...

Spindles with a square end of approx. 0.52 x 0.52 cm and a narrower round end with a diameter of approx. 0.3 cm are suitable for table legs. The l...

A graceful turned spindle for miniature model building. Bobbin 12 pcs, length 3.9 cm x thickness at the thickest part about 2 mm. Untreated wood ...