Classic casement window with plexiglass in a wood-finished version. The outside dimensions of the window are approximately 7 x 13.2 cm Immersio...

A large pane window can be installed either horizontally or vertically. 12-pane wooden window. External dimensions approx. 13.5 x 10.7 cm. Recesse...

Slender metal brackets for wall shelves. Product height approx. 1.8 cm x depth approx. 1.6 cm. the brackets are suitable for a shelf about 1 cm dee...

Very small hinges. rectangular part approx. 8.5 x 5 mm and triangular part approx. 1 cm x 5 mm. Width when unfolded 14 x height 8.5 mm 14 x 8....

A narrow and tall Bay window, which is installed from the floor level upwards. The largest width of the whole is approx. 13 cm, measured from the p...

Semicircular dollhouse window with plexiglass. There are 2 windows in the package. maximum width 7 cm, maximum height 3.8 cm immersion opening 6....

Large window made of untreated wood. The width of the large window is about 20 cm at the top, about 18 cm in the middle and about 19 cm at the bott...

The turned spindle is suitable for railings or table legs. Length about 6.6 cm x diameter 0.5 cm. Untreated wood. There are 4 pieces in the packa...

Decorative carved dollhouse door lock plate in antique style. Height 2.4 cm x plate width approx. 0.7 cm

A thick bar with a rectangular profile for building miniature models. Wood strip, 1.2 x 2.5 x length 45 cm. Untreated wood. Note the dimensions:...

Decorative shelf supports in antique patinated brass and a thin shelf plate in untreated wood. Graceful wall shelf for a dollhouse. Wooden shelf b...

A wide bay window with a deep window sill. The width of the lip of the bay window 'roof brush' is 25 cm and the width of the bottom edge is about ...

A metal ring for e.g. a curtain rod. Diameter about 5 mm. There are about 50 pieces in the bag.

A small door or drawer knob suitable for dollhouse furniture. The knob is 1 x 6 mm. There are 50 pieces in the package. Please note, this knob is...

This polish has a square base, about 0.5 x 0.5 cm. 6.7 cm, There are 12 pcs in the package. Untreated wood

A striking door handle for a doll's house door or cabinet, antique-looking patinated brass. Length about 2.6-2.7 cm

Two longer keys approx. 1.6 cm and two shorter keys approx. 1.2 cm. If necessary, the keys can be removed from the ring.

Small screws for building miniature models. Length approx. 4 mm x width approx. 2 mm. about 20 pcs in the package.

Turned spindle for miniature model building. The wood-ready turned product is suitable for dollhouse crafts and building miniature models. There ...

Vertical paneled cabin door with curved top edge and window. Door width approx. 10 cm x height 19 cm. Recessed opening approx. 9.6 x 18.7 cm with ...

Small antique patinated hinges for miniature models. height 9 mm, hinge pin height 15 mm, width when spread open 10.5 mm 1.0 x 1.4 cm 1.0 x 1.4 cm

Wooden relief molding for building miniature models. The height of the strip is about 2 cm x the length is 50 cm. Embossed wooden molding.

A decorative molding that is suitable, for example, as an eaves molding for a lace villa, for decorating a terrace, balcony or furniture. The heigh...

Decorative wooden molding for miniature model construction. Length 50 x height approx. 1.5 x porfile thickness approx. 0.7 cm. Untreated wood.

Fence element or balcony railing with a decorative pattern. Decorative railing approx. 16 x 8.7 cm. (the height of the fence without posts is appro...

Wooden handrail with turned posts. The length of the railing is about 29.3 cm x height 5.9 cm - The height of the end posts is about 6.7 cm. the th...

A small window without a 'dip opening' is also suitable as a fake window for a dollhouse. The outer diameter of the window is approx. 4.9 cm. The w...

A large 9-pane window with plexiglass and frames on the inside. The outside dimensions of the window are approximately 10.7 x 10.7 cm. Immersion op...

A classic white-painted window for a dollhouse. External dimensions of the window: width 9 x height 10 cm. Immersion hole 5.8 x 8.8 cm The window...

A high-quality and decorative pull for dollhouse furniture. Attachable flower-shaped part: diameter approx. 5 mm. Hanging puller approx. 1 cm. ...

A turned spindle with a square profile on both ends. 7.2 x 0.4cm. untreated wood. 7.2 x 0.4cm 7.2 x 0.4cm

A smooth, thin wooden strip is suitable, for example, as floor board material. Length 62 cm, thickness 1.6 mm, width 12.7 mm (Original measurem...

The turned spindle is suitable as a railing post or, for example, as an end post to a staircase railing. The square base is 1 x 1 cm and the heigh...

Low single-lever faucet for the bathroom sink. In the first pictures, the taps have been put in a blue sticker upright for photography. The pin to...

A very sturdy thick wooden beam, which can be used, for example, as a pillar of a model building or in the corners of a house. Note the dimensions!...

A tiny little lock plate. Plate diameter approx. 4 mm

High-quality pulls made of heavy brass. Thanks to the threaded pin, this product allows the knobs to be in the same place on both sides of the inte...

A wooden balustrade with a groove that is 2 x 2 mm. 46cm x 0.75 x 0.75cm groove 2x2mm Untreated wood

A pre-painted, turned column is suitable, for example, for building a porch and a balcony above it. The total length of the pole is 30.5 x square ...

Small wooden knobs for dollhouse furniture. Knob diameter approx. 3.5 mm, total length approx. 7 mm. base diameter approx. 1mm. White painted wood.

For the do-it-yourself builder, stove plates for a gas stove. The diameters of the rings are 1.5 and 1.3 cm.

Both halves of the 8-pane window open separately. The windows already have Plexiglas in place. 11.5 x 7.2 cm, opening. The immersion opening is ap...

A small brass ring is suitable, for example, as a ring for a curtain rod. Diameter about 6.5 mm.

Phillips head screws for miniature model building. Cross-head brass screw. Length about 8 mm. There are about 20 pieces in the package.

Round column for miniature model building. Dollhouse wooden post with a round profile. Column height approx. 21.5 cm (+/- 3 mm). The base approx. 2...

Two handles with keyhole. Dark brass. Patinated brass. Length about 2 cm.

A slightly shorter smooth strip for building miniature models. Width 1.5 x length 30 cm. Thickness about 1.5 mm. Untreated wood.

An old-fashioned hinge with decorative details. The total length of the hinge when 'opened' is about 3.5 cm. The longer part is 3 cm and the shorte...