An old-fashioned handle for chests of drawers, cabinets and other miniature models. Width of the handle approx. 1 cm, height approx. 0.9 cm. A movi...

A very small and graceful turned bobbin for the DIY enthusiast. Length 2.3 cm. The diameter varies from 0.2 to 0.3 cm. There are 12 pieces in the...

Wooden shelf supports cut to shape. The wooden support cut to shape is approx. 3 x 3 x 0.7 cm Untreated wood. The wooden support cut to shape is...

Wooden stairs with railing. Stairs width approx. 6.1 cm x length approx. 30 cm. Suitable for a room height of 20 cm +/- 1 cm

Handrailed stairs made of untreated wood for the DIY enthusiast. The building set is suitable for a 1:12 scale dollhouse. The width of the stairs i...

Vertical paneled cabin door with window. Door width approx. 11.5 x height 17.7 cm. Sink hole approx. 9.3 x 16.4. The inside frames and plexiglass...

A very small wooden knob for furniture. The diameter of the wooden knob is 2-3.5 mm and the length is approx. 6 mm. There are 12 knobs in the package.

A small brass ring is suitable, for example, as a curtain rod ring or around a napkin. Diameter about 4 mm. There are about 20 pieces in the bag.

Decorative bricks suitable for the corners of the house are made of wood. Height 40 cm x 4 cm x 0.3 cm. Untreated wood. Please note, the picture ...

Decorative knob, wood, 12 pcs Decorative knob, wood, 12 pcs, 1.0 x 0.3 x 0.3 cm

A low decorative plate for miniature model building. The list is thin plywood. Thickness about 1.3 cm. Height about 1.25 cm x length 30 cm. The wid...

A wooden finished unit for a roof window. Wooden ready-made dollhouse skylight window: width 10.5 cm x height 14 cm x measurement of the part that ...

Plexiglas window that opens in four different parts. Window width 8.3-8.5 x height 11.5 cm. The thickness of the frame is about 0.9 cm. In this win...

A traditional casement window is suitable for both a cottage and a house. The outside dimensions of the window are square, 10.7 x 10.7 cm. The imme...

A bay window with a deep windowsill for your own privacy. The width of the lip of the bay window 'roof brush' is 25 cm and the width of the bottom ...

A high-quality metal railing for a dollhouse balcony is also suitable for other dollhouse needs. Width 8, height 4, depth 1 cm metal

Wooden shutters 3.1 x 10 cm each Note, the slats are not 'open'. 3.2 x 11.7 cm each Suitable for window 8-23600 3.2 x 11.7 cm each Suitable for...

10 x 14mm

Corner molding with a wavy decorative border. 1.3 x 0.7cm x length 60 cm. Store the wooden slats tied together, e.g. in a plastic bag Thin,/narro...

A small door, cabinet or drawer knob suitable for dollhouse furniture. The height of the gold-colored knob is about 4-5 mm.

The modern faucet is especially suitable for the kitchen sink thanks to its long faucet handle. The height of the miniature faucet is about 1.3 c...

Very small screws with cross head. Length 5mm

A short and slightly thicker bobbin for crafts. 5 x 0.8 cm. Untreated wood

The long railing is made of untreated wood. Length approx. 30.5 cm x height 5 cm. Thickness is approx. 0.7 cm. Use it as a fence for your yard, a b...

Small brass-colored metal hinges 18 mm with 5 mm long screws. The package contains a total of 10 hinge sets for model building and dollhouse needs.

Decorative wooden trim with a two-tone pattern. The trim's width is approximately 1.1 cm, length 50 cm, and thickness at the highest point approxim...

Furniture legs 12 pcs, length 3.6 cm (0.4 x 0.4 cm) made of untreated wood. Small size and graceful turning suitable for building miniature models.

Ready-made wooden slatted fence for the dollhouse garden and other miniature worlds. Length 15.5 cm - height 8 cm Untreated wood. A gate with...

Width 17.2 x height 10.6 mm

A narrow window with Plexiglas sheets and frames on the inside included. Width 7.1 x height 13.5 cm. Immersion opening 6.2 x 12.3 cm. White painte...

A square window with beautiful frames. Size: 9.6 x 9.6 cm, immersion opening 6.5 x 7.5 cm. Untreated wood. Clear plexiglass. In the pictures, ...

Sturdy fence posts are suitable for e.g. between the garden fence and the gate. Wooden post 1.3 x 1.3 cm x height 9.1 cm. There are 5 poles in t...

Garden gate with a narrow board. Width 5.3 x depth 0.5 x height 7.9 cm. White painted wood. A narrow board garden fence with product code 8-227...

Low and thicker spool. 5 x 0.8 cm White painted wood

Turned spindle for furniture legs or railings and other structures. Turned spindle 6.7 cm x 0.5 cm. Square base. white painted wood

Pre-painted corner bricks in the corners of the house. Length 40 cm x width 4 cm x thickness approx. 0.3 cm.

Cartwheel for building miniature models. The diameter of the wheel is about 6 cm and the thickness is about 0.4 cm. At the shaft, there is a proje...

6-cornered dome roof for a gazebo or a castle tower. The diameter of the roof is about 16 cm x height about 9 cm. Matte black thin metal. The roos...

Classic crescent shaped handle with rivets. Width about 1 cm x depth about 0.6 cm from the widest part of the crescent. There are 2 pcs in the pack...

A graceful metal handle with a decorative three-dimensional surface. Dollhouse miniature handle approx. 2 cm and 2 nails. There is 1 pc in the pa...

Antique patinated angular pull for cabinet door or drawers. Metal puller 11 mm x 5.5 mm. Pins about 5 mm.

A large front door with a panel wall and vertical windows suitable for a modern house. The external dimensions of the whole are about 16.4 x 19.3. ...

A strong hinge for the door on the right side of the dollhouse. Height 4 cm. There are 2 hinges and small screws in the package. There are two ...

A round wooden post painted white. A painted wooden post for a dollhouse with a round profile. Column height approx. 21.5 cm (+/- 3 mm). The base a...

Ready-painted pole for railings or furniture legs. 6.7 x 0.6cm. White painted wood.