Small pulls with a fish-shaped decorative part hanging loosely. Antique patinated metal. Height APPROXIMATELY about 1 cm.

The antique patinated metal lock is suitable, for example, for a chest or a box. Width approx. 1.2-1.3 cm, height of one section approx. 0.4-0.5 ...

Cross-head screws 8 x 2 mm. Screw length approx. 8 mm x thickness approx. 2 mm. Screw length approx. 8 mm x thickness approx. 2 mm. Screw length a...

Very small screws with cross head. Length 5mm

These hinges are suitable for a 9-10 mm thick plate, i.e. they can be used, for example, to hinge the front wall, roof and similar parts of a doll...

A miniature knocker for the front door of a dollhouse, the "knocking part" of which moves. Height approx. 1.7 cm, width approx. 1.1 cm

A ceiling lantern with a smooth roof without a window. 14.5 x 10.1 cm Width from the front 9.8 cm and height to the brush approx. 14 cm. The le...

A short and slightly thicker bobbin for crafts. 5 x 0.8 cm. Untreated wood

Decorative miniature handles for dollhouse drawers and cabinets. The diameter of the handle base is approx. 5 mm and the hanging part is approx. 1 ...

The package contains 15 stair railings and 30 brackets. The iron bits are approximately 5 cm wide and are suitable for a 3.5 cm wide stair car...

The turned spindle is suitable as a railing post or, for example, as an end post to a staircase railing. The square base is 1 x 1 cm and the heigh...

A simple decorative triangle above a dollhouse window or door. The width of the lower edge is approx. 9.7 cm. Total width at the widest point a...

A decorative wooden fence, which can be painted with PLUS COLOR paints or treated with other materials suitable for wood as desired. Length 23.5 ...

The wooden gate fits its slats with the product code DIY124. Length 5.5 cm - height 8 cm. untreated wood. This gate fits the fence with the co...

Graceful balustrade with groove for vertical posts. Length 45 cm. Untreated wood.

A striking decorative triangle with a lid like a small canopy. Total width approx. 13.5 cm, height 5.5 cm, depth of the magazine 2.5 cm The pa...

A nice brass miniature clock, for example to call a servant in a dollhouse or for a shop door. Wall mounting section: width 1.1 cm x 0.4 cm. screw...

The handle of a drawer or, for example, a coffin, is metal. The total width of the handle is about 1.3 cm. The handle turns with a pin attachment.

Width 17.2 x height 10.6 mm

A tiny hinge for dollhouse furniture and other miniature model construction. The height of the hinge point is approx. 6 mm, the width of the whole...

Square window with decorative pediment, plexiglass and moldings. The outside dimensions of the window are 9.6 x 9.6 cm. Recessed opening: width ap...

White painted shutters. White painted wood. The size of one shutter is 3.1 x 10 cm. The slats are not 'open'. Please note, the paint surface of t...

Garden gate with a narrow board. Width 5.3 x depth 0.5 x height 7.9 cm. White painted wood. A narrow board garden fence with product code 8-227...

Narrow-board fence element already painted white. 2 pcs. Width 15.7 x thickness 0.5 cm x height 7.9 cm. The package includes two garden fences. ...

A pre-painted, turned column is suitable, for example, for building a porch and a balcony above it. The total length of the pole is 30.5 x square ...

I painted matte black on the chest of drawers and other furniture. See the picture of the assembled handle on the product card. The width of the h...

A flat pull as a window handle, for drawers and small cabinets. The total length of the handle is approx. 2.1 cm and the width is 0.3 cm. small sc...

A wooden dollhouse door with a curved window. Immersion opening 17.9 x 7.8 cm External dimensions 18.4 x 8.8 cm Plexiglas in the window. Insid...

Cartwheel for building miniature models. The diameter of the wheel is about 6 cm and the thickness is about 0.4 cm. At the shaft, there is a proje...

High-quality sink made of stainless steel-colored metal. The outer dimensions of the whole are 9 x 4 cm. The basin's immersion opening is approxim...

A very small coat rack of patinated metal. The width of the coat rack is approx. 3.8 cm and the height is approx. 2.1 cm. The hanger has pre-drill...

Asian-inspired handles for dollhouse furniture. The width of the handle is about 1.6 cm and the height from the highest point of the semicircle is ...

Classic crescent shaped handle with 'rivets'. Width about 1 cm x depth about 0.6 cm from the widest part of the crescent.

A graceful metal handle with a decorative three-dimensional surface. Dollhouse miniature handle approx. 2 cm and 2 nails. There is 1 pc in the pa...

The eye screw is suitable, for example, for attaching a curtain rod in a dollhouse. Eye screw, 5x10mm, antique brass, 5 pcs

A strong hinge for the door on the right side of the dollhouse. Height 4 cm. There are 2 hinges and small screws in the package. There are two ...

Brass screw with small cross head. Cross-head brass screw. Length about 6 mm. There are 12 pieces in the package.

A very small screw for building miniature models. Length approx. 6 mm x base approx. 2 mm. About 20 pcs in the package.

A round wooden post painted white. A painted wooden post for a dollhouse with a round profile. Column height approx. 21.5 cm (+/- 3 mm). The base a...

A white painted column with a square shaped profile. Height approx. 21.5 cm. The base of the column is approx. 2.5 x 2.5 cm and the column section ...

A wooden post with a square-shaped profile. Height approx. 21.5 cm. The base of the column approx. 2.5 x 2.5 cm and the column section itself appr...

Turned spindle for miniature model building. The wood-ready turned product is suitable for dollhouse crafts and building miniature models. There ...

A small turned column. Length about 5.2 cm. The diameter of the end is about 0.2 cm. The thickest part is about 0.35 cm.

A decorative turned wooden post for the do-it-yourself enthusiast. The length of the pole is about 4 cm. The straight section at the end is approx...

A small turned post. Length about 3.1 cm. The ends are about 0.5 x 0.5 cm. Untreated wood

Handrailed stairs made of untreated wood for the DIY enthusiast. The building set is suitable for a 1:12 scale dollhouse. The width of the stairs i...

Long piano hinge in brass-colored metal. Width when spread open 26 mm. Length 60 cm. Width when spread open 26 mm Width when spread open 26 mm