Genuine stone tile, cream, small, 25 pcs
The package contains 25 square stone tiles made of real brick. The size of the package is 16 cm2. The size of one stone is approximately 8.5mm x 8.5mm x 2mm thick.
By combining tiles of different colors, you can create a patterned floor, for example in the hall of a dollhouse, basement, chapel or even a greenhouse. See example pictures for combination models.
These stone products are made from genuine stone materials in England. The products are sized for 1:12 scale miniature models, yards and dollhouses, which means that the thinness of the material has also been taken into account in proportion to the scale.
The adequacy of stone products is indicated in square centimeters: for example, 64 cm2 is enough for an area that is, for example, 8 x 8 cm or 16 x 4 cm. Similarly, e.g. 400 cm 2 is enough for an area that is e.g. 10 x 40 cm or 20 x 20 cm.
Installation:
- Make sure the area is clean and dry. Place the stones in the pattern you want and leave about 1mm gap in the seams. Wipe off any stone dust with a damp cloth. Glue the stones in place one at a time with PVA glue. Allow to dry completely.
- Mix 50/50 PVA glue and water. Apply the mixture with a brush to the floor as a sealant. Allow to dry completely.
- Seal the floor with a sealing compound from the same series or a similar product. The sealant package can be ordered separately and comes with instructions in English.
Stacey's Miniature Masonry stone products are made from genuine stone materials in England. The products are sized for 1:12 scale miniature models, yards and dollhouses, which means that the thinness of the material has also been taken into account in proportion to the scale.
The adequacy of stone products is indicated in square centimeters: for example, 64 cm2 is enough for an area that is, for example, 8 x 8 cm or 16 x 4 cm. Similarly, e.g. 400 cm 2 is enough for an area that is e.g. 10 x 40 cm or 20 x 20 cm.
The packages usually have a few extra stones over the stated amount, but there may also be broken stones in the package.
Installation:
- Make sure the area is clean and dry. Place the stones in the pattern you want and leave about 1mm gap in the seams. Wipe off any stone dust with a damp cloth. Glue the stones in place one by one with PVA glue. Allow to dry completely.
- Mix 50/50 PVA glue and water. Apply the mixture with a brush to the floor as a sealant. Allow to dry completely.
- Seal the floor with a sealing compound from the same series or a similar product. The sealant package can be ordered separately and comes with instructions in English.
Stacey's Miniature Masonry stone products are made from genuine stone materials in England. The products are sized for 1:12 scale miniature models, yards and dollhouses, which means that the thinness of the material has also been taken into account in proportion to the scale.
The adequacy of stone products is indicated in square centimeters: for example, 64 cm2 is enough for an area that is, for example, 8 x 8 cm or 16 x 4 cm. Similarly, e.g. 400 cm 2 is enough for an area that is e.g. 10 x 40 cm or 20 x 20 cm.
The packages usually have a few extra stones over the stated amount, but there may also be broken stones in the package.
Installation:
- Make sure the area is clean and dry. Place the stones in the pattern you want and leave about 1mm gap in the seams. Wipe off any stone dust with a damp cloth. Glue the stones in place one at a time with PVA glue. Allow to dry completely.
- Mix 50/50 PVA glue and water. Apply the mixture with a brush to the floor as a sealant. Allow to dry completely.
- Seal the floor with a sealing compound from the same series or a similar product. The sealant package can be ordered separately and comes with instructions in English.