Genuine stone tile, rufous gray

Rectangular and square stone tiles with a thickness of about 2 mm. Real stone can be used to cover an old-fashioned kitchen, basement, pantry, hall or make stone paths in the garden.

The stones are of different sizes and can be cut with e.g. tongs as needed. When using a craft knife, you should make an incision on both sides of the stone and then snap the stone across, e.g. with pliers.

Package capacity 645 cm ^2.

These stone products are made from genuine stone materials in England. The products are sized for 1:12 scale miniature models, yards and dollhouses, which means that the thinness of the material has also been taken into account in proportion to the scale.

The adequacy of stone products is indicated in square centimeters: for example, 64 cm2 is enough for an area that is, for example, 8 x 8 cm or 16 x 4 cm. Similarly, e.g. 400 cm ² is enough for an area that is e.g. 10 x 40 cm or 20 x 20 cm.

The packages usually have a few extra stones over the stated amount, but there may also be broken stones in the package. Please note, this package may also contain irregularly shaped stones.

Installation:

• Make sure the area is clean and dry. Arrange the stones in the pattern you want and leave about 1mm gap in the seams. Wipe off any stone dust with a damp cloth. Glue the stones in place one by one with PVA glue. Allow to dry completely.
• Mix 50/50 PVA glue and water. Apply the mixture with a brush to the floor as a sealant. Allow to dry completely.
• Seal the floor with a sealing compound from the same series or a similar product. The sealant package can be ordered separately and comes with instructions in English.