Burnt Tudor brick, slim model, 1000 pcs
Size of one Tudor red brick 18 x 4 x 2.7 mm. There are 1000 pieces in the package and they are enough for an area of 780 cm2 .
The 1:12 scale miniature bricks are cut from real fired brick. With a thinner model, surfaces can be covered in such a way that the end result looks as if it was built from whole bricks. A good result can be obtained by using PVA glue, sealing them with a 50/50 mixture of PVA glue and water, and finishing the plastering on the outer edges with small-grain mortar from the same series.
These stone products are made from genuine stone materials in England. The products are sized for 1:12 scale miniature models, yards and dollhouses, which means that the thinness of the material has also been taken into account in proportion to the scale.
The adequacy of stone products is indicated in square centimeters: for example, 64 cm2 is enough for an area that is, for example, 8 x 8 cm or 16 x 4 cm. Similarly, e.g. 400 cm 2 is enough for an area that is e.g. 10 x 40 cm or 20 x 20 cm.
The packages usually have a few extra stones over the stated amount, but there may also be broken stones in the package.
Note:
Note: