Electrical accessories 12V

12v voltage and 2000mA capacity Transformer for the dollhouse for approx. 36 individual 12V lamps and lighting rail for 12 dollhouse lamp wires....

Do-it-yourself electrician plugs. Please note, the pins of the plugs are usually detached in the package. When the electrical cord is installed i...

Round light bulb with cord and plug 12V electric lamps require a 12V transformer to operate. The lamp is replaceable. 12V electric lamps require...

Some of the lamps have this tiny Bi-pin bulb. The wires of the burners are cut to a suitable size and the wires are inserted into the two very smal...

Very small lamps with an electric cord, without a plug. The length of the cord is about 30 cm. the diameter of the microlamp is about 2.5 mm and th...

The narrow long model is the most common Lamp model in dollhouse 12V electric lamps. 50 mA/lamp. there are four lamps / spare bulbs in the packag...

2-wire electrical cord for the do-it-yourself enthusiast for 12V electrification of a dollhouse. Length 5 meters. The white protective cover of t...

For the do-it-yourself enthusiast, an old-fashioned patinated lamp body with electricity. The model is particularly suitable as a wall lamp, but is...

Handy accessory for changing the rice pudding-shaped lamp of the doll's house lighting. Elongated rice-grain-shaped lamps can be easily changed a...

The extension cords with three sockets are suitable for inside the dollhouse, for example for the need for seasonal lights (Christmas tree lights) ...

The round model is a fairly common lamp in dollhouse lighting. 50mA 12V 12V electric lamps require a 12V transformer to operate.

A few different candle models are used in chandeliers and crystal chandeliers. Check the dimensions. This slightly rarer bulb is suitable for certa...

A watchmaker's screwdriver with five small tips. One blade for making holes for copper tape, 1 flat head screwdriver, one cross head and two torx b...

The lighting rail with 12 switches enables the lighting of different rooms individually. This model requires a transformer that also has a branch ...

The smaller 1500mA fuse fits the six-plug short light rail previously in the range, which is in the transformer package MM13102. Please note, the p...

1500mA fuses for the lighting rail of the 12V electrical system. These fuses are suitable for the 1500mAh transformer 12V lighting rails sold in ...

1000mA fuses for the lighting rail of the 12V electrical system. 1000 mA / fuse These fuses are suitable for the 1000 mAh transformer 12V light...

Suitable for 1:12 scale electric lamps. A more accurate measurement to come. The product is intended for the electrical installation of a dollho...

Suitable for 1:12 scale electric lamps. A more accurate measurement to come. The product is intended for the electrical installation of a dollho...

2-wire electrical cord for the do-it-yourself enthusiast for 12V electrification of the dollhouse. Length 15 meters The white protective cover of...

The branching piece for the strong transformer enables four lighting rails to be connected to one transformer. Suitable for a large house where s...

Extension cord suitable for 12V electrical installation in a one-piece package. The extension cord works with the dollhouse's 12V lights and transf...

This transformer with branch connector is suitable for lighting rail DHE9244, which also has a branch connector. The capacity of the transformer is...

A cobbler's lamp model lamp dome for the do-it-yourself enthusiast. The diameter of the small lamp shade is about 2.1 cm from the bottom edge and t...

copper tape for electrification of miniature models. note the picture is wrong: this product only has copper colored narrow tape. In a roll 25 mx 5...

Smaller roll for copper tape installation of dollhouse electricals. Two-color copper tape to avoid wrong connections. Length 2 meters. Two-color c...

Suitable for 1:12 scale electric lamps. A more accurate measurement to come. The product is intended for the electrical installation of a dollho...

Installation set for ceiling light suitable for copper tape. Suitable for 1:12 scale electric lamps. A more accurate measurement to come. The pro...

For the DIY electrician, wiring for very small Bi-pin bulbs. Bulb holder for bulb no FA19039 Please note, the package does not include plugs or b...

You can connect more lamps to the lighting rail with an extension cord. NOTE 1 pc The product requires a 12V transformer to operate. Please note,...

With the help of the connector, you can connect the dollhouse's 12V electric lamp to a standard rectangular 9V battery, without needing a transfor...

Two-color copper tape for electrifying a dollhouse with copper tape. Two-color copper tape to avoid wrong connections. Length 5 meters. Two-color ...

for copper tape and transformer wire To connect the transformer wires to the copper blanket.

An extension piece between two copper connector wires. Length about 45 cm.

Socket for copper tape installation The very small socket is approx. 1 cm x 0.76 cm. For copper tape equipment, Attaches to the wall by pressin...

With the help of a test lamp, you can check the connections of the copper tape installation and also locate the copper tape after the copper tapes ...

Hollow rivets are installed at the junction of two copper tapes. For connecting copper tapes

This wire is used to connect LED light strips 6-22900 or 6-22901 to the lighting rail of the 12V transformer and to the electrical system. Connecti...

Miniature LED light strip for 12V electrical system. The length of the ribbon part is about 10 cm. Total length about 11 cm. The light is cooler ...

LED light strip of miniature models for 12V electrical system. The length of the ribbon part is about 5 cm. Total length about 6 cm. The light is...

Suitable for a 12V transformer with a branch connector. NOTE, only suitable for a transformer with a branch connector. 12 places for lamp plugs. ...

2000mAh fuses for the lighting rail of the 12V electrical system. These fuses are suitable for the 2000 mAH transformer 12V lighting rails sold in...

The sockets are equipped with spikes for copper tape installation. Socket size approx. 1.3 x 0.7 x 0.7 cm. Suitable for mounting on copper tape. ...

Basic supplies for electrifying a doll's house with unobtrusive copper tape. The package contains 3 m of copper tape / two colors 60 pcs nails, 3 m...