You will see the shipping cost at checkout.
[message]
[title]
[message]The lighting turns the dollhouse into a home and creates the most wonderful atmosphere!
Important information about the dollhouse's electrical equipment:
- All the transformers we sell are intended for 230 V mains voltage to convert the voltage for 12 V lamps. Please note, this is not compatible with the 4.5V voltage of the Lundby electrical system.
- The conductors of lighting rails and lamps MUST be unclamped before connecting them to power. Otherwise the wires will melt.
- Before installing the lamp, make sure that its lamp or lamps light up. If they don't light up, twist the bulbs a little tighter.
- The fixing of ceiling and wall lamps should be secured with good glue or a support hook, because the original sticker may not be strong enough to hold the lamp in place.
- It is recommended to use only 80% of the transformer's capacity in continuous use.
- Electrifying a doll's house is not very complicated, and the result is definitely worth the effort. If necessary, ask for advice by email
info@minimaailma.fi
The leg of the table lamp is 'frosted glass', with miniature decorations brighter. The rather tall and striking lamp is approx. 7 cm high. This...
View full detailsA graceful little floor lamp with a brass-colored body. a brass table lamp with a so-called milk glass dome. Height approx. 4 cm. This electric l...
View full detailsA small table lamp with a translucent colorful dome. The height of the lamp is about 4.5 cm and the diameter of the dome at the widest point is abo...
View full detailsA simply stylish lamp for the desk of a modern dollhouse. The diameter of the base of the 12V electric lamp is approx. 1.8 cm and the total heigh...
View full detailsThe narrow lamp is suitable for tight spaces and takes up little space. The table lamp is 1:12 scale. Height 5.5 cm, diameter of the base of th...
View full detailsSilver candlesticks with 12V electrification. Height approx. 4.5 cm and base diameter approx. 1.3 cm. 12V electric lights require a 12V transform...
View full detailsElectric small candlesticks for a dollhouse. The total height of the candles is about 4.6 cm. The diameter of the leg coming to the table is about ...
View full detailsHollow rivets are installed at the junction of two copper tapes. For connecting copper tapes
Suitable for a 12V transformer with a branch connector. NOTE, only suitable for a transformer with a branch connector. 12 places for lamp plugs. ...
View full detailsOld-fashioned ceiling lamp with a decorative frame. The height of the lamp is about 4-5 cm. Total height with chain about 11 cm. The chain can be s...
View full detailsA graceful electric candle holder with five candles. Height approx. 4.5 cm, diameter at the candles approx. 3.5 cm. The diameter of the part coming...
View full detailsA graceful lantern-shaped lamp with a black body. Victorian gas or oil lamp, height approx. 4.5 cm A 12V electric lamp requires a 12V transformer...
View full detailsThe elegant ceiling lamp has the color of milk glass and has a flower pattern. The diameter of the lamp is approx. 3 cm and the height is approx....
View full detailsTranslucent Ceiling lamp for a dollhouse. The diameter of the dome from the bottom edge is about 3.3 cm x the height of the dome is about 2.5 cm....
View full detailsAdjustable floor lamp for modern interior design. The height of the modern dollhouse floor lamp is approx. 11 cm. The lampshade bends to focus the ...
View full detailsThe three-pronged low foot lamp is also suitable for smaller-scale dollhouses. Please note, this 12V electric foot lamp is only approx. 9 cm high...
View full detailsA classic ball lamp in miniature size is perfect for a dollhouse bathroom, for example. The lamp can be mounted on the ceiling, wall or even on a t...
View full detailsFestive brass candlestick with chain decoration. The diameter of the chandelier is about 4.5 cm x the height from the ceiling is 7 cm. This crown d...
View full detailsThe dollhouse ceiling rose is a fine decoration element that emphasizes the features of a beautiful miniature chandelier and also a standard dollh...
View full detailsAntique patinated decorative candle with 12V electricity. Height about 4.7 cm. The diameter of the stand is 1.5 cm. The candle lamp has a so-c...
View full detailsThe body of the high-quality ceiling lamp is patinated brass with leaf decorations. The diameter of the lamp at the lamp dome is about 4.5 cm. T...
View full detailsA short, slightly thicker electric candle in a matte black wall mount. Small black wall candle. height approx. 2 cm. Compatible with Tudor chande...
View full detailsThe timeless design of the miniature lamp fits both traditional and modern, industrial interiors. The height of the wall bracket is approx. 2.4 c...
View full detailsWall-mounted one-candle sconce. The diameter of the board entering the wall is approx. 1.1 cm. The total height of the candlestick is approx. 3 cm ...
View full detailsClassic candle lamp with electric light. The background plate is about 1 x 2 cm. The height of the whole is about 4 cm. This electric lamp requir...
View full detailsA graceful wall lamp with a milk glass-colored shade. The total height of the lamp is approx. 3.3 cm. The diameter of the milk glass dome is about ...
View full detailsWall-mounted oil lamp with a golden brass frame. Total height about 4.5 cm. the lamp protrudes from the wall about 2.2 cm. A 12V electric lamp re...
View full detailsA graceful electric candle for the wall. The diameter of the plate that goes into the wall is about 1.2 cm. The height of the whole is about 3 cm a...
View full detailsAntique patinated oil lamp 12V electrified. The part that goes into the wall is about 1 x 2.5 cm. The height of the lamp is about 4.5 cm. The lamp ...
View full detailsA simple and straight lamp for a modern dollhouse. Lamp height approx. 3.7 cm, diameter approx. 0.7 cm. The diameter of the plate coming into the w...
View full details2-wire electrical cord for the do-it-yourself enthusiast for 12V electrification of the dollhouse. Length 15 meters The white protective cover of...
View full detailsThe branching piece for the strong transformer enables four lighting rails to be connected to one transformer. Suitable for a large house where s...
View full detailsA cobbler's lamp model lamp dome for the do-it-yourself enthusiast. The diameter of the small lamp shade is about 2.1 cm from the bottom edge and t...
View full detailsSmaller roll for copper tape installation of dollhouse electricals. Two-color copper tape to avoid wrong connections. Length 2 meters. Two-color c...
View full detailsFor the DIY electrician, electrical wiring for very small Bi-pin bulbs. Bulb holder for very small Bi-pin bulb Please note that the package does ...
View full detailsA wall lamp for a dollhouse with two electric candles is a wonderful ensemble with a miniature mirror. dollhouse wall lamp height approx. 3.5 cm,...
View full detailsThe doll's house wall sconce is the color of patinated brass. The white lampshades are open at the top, from which the lamplight shines. The tota...
View full detailsAtmospheric spotlight for blackboards and other decorative objects. Lamp width approx. 3 cm. The lamp comes out of the wall about 3 cm. This elec...
View full detailsA classically stylish brass wall lamp with a rotating 'stem'. Height about 4 cm. Reversible 'arm'. The first "stem" is about 2.2 cm and the yoin is...
View full detailsA very small table-top 'oil lamp' in matte black. 12V powered dollhouse lamp. Height APPROXIMATELY about 3-3.5 cm. A more accurate measurement to c...
View full detailsA classic table lamp with a light shade. The total height of the lamp is approx. 5.9 cm. The diameter of the dome is 4 cm from the bottom, approx. ...
View full detailsModern Table lamp or spotlight. The total height of the lamp is approx. 6 cm. The diameter of the dome is approx. 2.4 cm and the diameter of the ...
View full detailsA small table lamp modeled after an old oil lamp. Copper colored body. Height approximately 3.5-4 cm. More detailed measurements to come. A 12V e...
View full detailsDecorative antique patinated 12V electric candle fits in a very small space.. Height approx. 3.7 cm. Stand approx. 1.1 x 1.1 cm. Patinated metal...
View full detailsTwo-color copper tape for electrifying a dollhouse with copper tape. Two-color copper tape to avoid wrong connections. Length 5 meters. Two-color ...
View full detailsfor copper tape and transformer wire To connect the transformer wires to the copper blanket.
Socket for copper tape installation The very small socket is approx. 1 cm x 0.76 cm. For copper tape equipment, Attaches to the wall by pressin...
View full detailsWith the help of a test lamp, you can check the connections of the copper tape installation and also locate the copper tape after the copper tapes ...
View full details€100,00 away from free shipping!
0 of 3 items selected
Love it? Add to your wishlist
Your favorites, all in one place. Shop quickly and easily with the wishlist feature!